Table of contents
CPLD Access
With TEB0729:
Connect MiniUSB cable to XMOD programm
Set DIP S2-1 to OFF
Power ON the board
Run "Lattice Diamond Programmer"
Select "Create new project from JTAG chain" and press "OK"
Available CPLD Firmware
TE0729 CPLD
- Firmware description with different Variants
TEB0729-REV02_Plus is default delivered Firmware for modified TEB0729-REV02 and newer TEB0729 Revisions.
TEB0729-REV02 is optional Firmware variant, for older B2B Connector assignment.
Download
TE0729
/<PCB Revision>/Firmware/
Use files from the subfolders of your PCB revision
General instructions