Skip to end of metadata
Go to start of metadata

Overview: TE0720 GigaZee Zynq SoM


Figure 1: TE0720 GigaZee Zynq SoM (REV 01).

Features

  1. 1.5A, 4 MHz PowerSoC DC-DC Step-Down Converter with Integrated Inductor (Enpirion EP53F8QI) for 1.8V Power Supply
  2. System Controller CPLD (Lattice LCMXO2-1200HC): 1,200 Macrocell CPLD with Block RAM, Flash and PLL
  3. User LED 1 (Green)
  4. User LED 2 (Red)
  5. 32 MByte Quad SPI Flash memory (Winbond W25Q256FV)
  6. MEMS sensor (ST Microelectronics LSM303DTR): 3-axis accelerometer and 3-axis magnetometer (Not populated!)
  7. Real Time Clock with Embedded Crystal (Intersil ISL12020M): ±5ppm Accuracy
  8. 1 GByte = 2 x 256 MBitx16 (32-bit wide) DDR3 Memory (Memphis MEM4G16D3EABG-125I)
  9. e·MMC NAND Flash (Micron MTFC4GMVEA-4M, may also be different manufacturer due to availability) usually 4 GByte, depends on assembly option
  10. Xilinx Zynq-7000 System-on-Module (Xilinx XC7Z020) - Processing System: Dual ARM Cortex-A9, unified 512 KByte L2 Cache, 256 KByte on-chip Memory, 54 Multiplexed I/O Pins (MIOs); Programmable Logic: Artix-7 FPGA, 85 K Logic Cells, 560 Kbyte extensible Block RAM (140x 36 Kbit BRAM Blocks), 220 programmable DSP Slices, Dual 12-bit 1Msps Analog-to-Digital Converter, 200 I/O Pins (SelectIO Interfaces)
  11. User LED 3 / FPGA Done (Green)
  12. 4 A High-Efficiency Power SoC DC-DC Step-Down Converter with Integrated Inductor (Enpirion EN6347) for 1.0V Power Supply
  13. 1.5A, 4 MHz PowerSoC DC-DC Step-Down Converter with Integrated Inductor (Enpirion EP53F8QI) for 1.5V Power Supply
  14. Trenz 4 x 5 Module Socket Connector (3x Samtec LSHM Series Connectors)
  15. Gigabit Ethernet Transceiver PHY (Marvell 88E1512)
  16. Highly Integrated Full Featured Hi-Speed USB 2.0 ULPI Transceiver (Microchip USB3320C-EZK)

 


Document Change History

daterevisionauthorsdescription
2014-02-100.2 Sven-Ole VoigtWork in progress
2013-04-170.1

Antti Lukats, Thorsten Trenz

Initial release
 

All

Antti Lukats, Thorsten Trenz, Sven-Ole Voigt  
  • No labels