Date: Fri, 29 Mar 2024 08:41:23 +0100 (CET) Message-ID: <110400638.4253.1711698083040@confluence> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_4252_1500978649.1711698083039" ------=_Part_4252_1500978649.1711698083039 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
Compressed folder, containing all necessary files for the demo - Download-Link
The compres=
sed folder needs to be extracted, so that the contend can be used inside ot=
her programs.
The demo itself requires the installation of Visual Analog (Version 1.9.48.1) - Download Link
2 Variants available:
Open ports and identify the port used by th= e module, the number is here marked with an X
Start Visual Analog and op= en a Blank canvas
Via File =E2=86=92 Open point to the file AnalogM=
AX_DAQ1_Capture.vac from the demo folder.
Press Tools =E2=86=92 External= Tools... to prepare the usage of adcapture.exe, = in the new appearing window
Click Add in the new opene=
d window and insert the name "adcapture" in the Display Text.
Click Browse... and select the file "adcapture.exe" from =
the downloaded demo.
Into Arguments insert "COMX,115200 1024 =
c:\temp\capture.txt 1", where the X in COMX
is a placeholder for your comport number.
To finish the setup press OK.
Parameter description:
COM14 - COM port which is used for the connection.
115200 - Baud rate which is used for the connection.
1024 - Amount of K samples to read, minimum 64 and maximum is 1024.
c:\temp\capture.txt - File name and path which specifies where to storage =
the data.
1 - Command to adjust for the modules gain, possible values are:
TEI0015 and T=
EI0016: 1 for a gain of 1, 2 for a gain of 2, 4 for a gai=
n of 4 and 8 for a gain of 8
TEI0023: =
; 1 for a gain of 0.25, 2 for a gain of 0.5, 3 for a gain of 1,=
4 for a gain of 2, 5 for a gain of 4, 6 for a gain of 8 and 7 for a gain o=
f 16
Befor running the demo, in Visual Analog, f=
ill into the Pattern Loader the ADC sampling rate of your module:
TEI0015 - 2 MHz / Resolution - 18 bit
TEI0016-0x-08-C8A - 0.5 MHz / Resolution - 16 =
bit
TEI0016-0x-08-C8B - 1 MHz / Resolution - 16 bit
TEI0023 - 2 MHz / Resolution - 18 bit
This sampling rate is only changed, when the demo has been run.
It is often necessary to fill in the value two times before it is recogniz=
ed.
In dependency to the language settings, 0.5 MHz is sometimes not recognize=
d,
try instead of the separation point (0.5) a separation comma (0,5) or with=
out the zero (.5 ,5)
In the graph section, one can check the present sampling rate
The window shows the activity of the tool "= adcapture", the picture below shows it, when it is finished
In Visual Analog, use "F5" or press Canvas =E2=86=92 Run to update the screen
Open ports and identify the port used by th= e AnalogMAX DAQ1 as visible in Figur= e 10.