Page History

...

Scroll Title

anchor	Table_DIP_PB
title	DIP Switches /Push Buttons

Scroll Table Layout

Dip	Setting	Note
S1		Push button configured by CPLD as reset
S2-1	OFF	OFF, OFF, OFF selects FMC _VADJ OFF. The choice OFF, ON, OFF selects 1.8V FMC_VADJ, which is a valid bank power for TE0720.
S2-2	OFF
S2-3	OFF
S2-4	OFF	Selects 4x5 module SOC/FPGA JTAG
S2-5	OFF
S2-6	OFF
S2-7	ON	Module power enable.
S2-8	OFF	Extended power sequenzing (if implemented).
S3-1	OFF	For Zynq modules: Primary Boot Mode SD/QSPI. OFF corresponds to boot from SD card.
S3-2	OFF	Overide automatic enable FMC_VADJ. ⁽¹⁾⁽²⁾

...

Versions Compared