Page History

The TE0630 module series has E0630 series modules have been designed to be mechanically and (as far as possible) electrically backward compatible with TE0300 series modules.

Designs based on a TE0300 module can be ported to a TE0600 module as described below.

Mechanical compatibility

TE0630 series modules are mechanically equivalent to the TE0300 module seriss by main mechanical and electrical characteristics.

...

series modules:

• module dimensions: same length, width, height;
• mount holes: same dimensions and placements;
• B2B (board to board) connectors: same type and placements.

Designs based on a TE0300 module can be ported to a TE0600 module without any mechanical redesign.

Power supply compatibility

TE0300 and TE0630 series modules have similar power supply requirements and matched power input pins. User signals to B2B connectors routed as differential pairs and single ended lines. Differences in pin types shown in Table 16, not listed signals have same or compatibleSignals routed as differential pairs can be used as single ended. type. Chances are that designs based on a TE0300 module can be ported to a TE0600 module without any power supply redesign.

Power supply pins and ground pins of TE0300 series modules match those of TE0630 series modules. Designs based on a TE0300 module can be ported to a TE0600 module without any power supply pin and ground pin redesign.

Signal compatibility

Most user signal pins of TE0300 series modules match their corresponding pins on TE0630 series modules. Designs based on a TE0300 module can be ported to a TE0600 module without any redesign for those pins.

User signal pins of TE0300 series modules NOT matching their corresponding pins on TE0630 series modules are listed in the following table. Designs based on a TE0300 module using the user signal pins listed in the following table can be ported to a TE0600 module by adapting the project to the type (SIO, DIO, CIO) and polarity (_P. _N) change of the corresponding signal pins.

...

...

differences.
See Table 17 for pin types definitions.

Table 17: TE0300 and TE0630 pin types

Most user signals to B2B connectors routed from same FPGA banks. Differences shown in Table 18.

Table 18: TE0300 and TE0630 user signals I/O banks differences.
I/O Banks power supply for both modules shown in Table 19.

Table 19:

Bank 0 I/O supply voltage at both modules can be configured by user, see chapter On-board Power Rails.

Mechanical compatibility

The TE0630 is mechanically equivalent to the TE0300:

...

...