...
- TE USB FX2 module is turned off (powered off);
- EEPROM connection disabled (EEPROM switch is set in a way to disable EPPROM connection to USB FX2 microcontroler);
- TE USB FX2 module turned on (powered on);
TE USB FX2 module is inserted in the USB port of the computer (aka plugged in, aka attached);
- module enumerates in recovery mode (VID = 0x04B4, PID = 0x8613);
- Install Cypress USB Generic Driver if needed (1);
EEPROM connection enabled (EEPROM switch is set in a way to enable EPPROM connection to USB FX2 microcontroler);
![(warning)](/s/-ezxv97/9103/1q7egw3/_/images/icons/emoticons/warning.svg)
Warning |
---|
EEPROM connection shall always be enabled during EEPROM programming; |
- Cypress firmware update tools (Cypress USB Console recovery boot, Cypress USB Control Center recovery boot) and OpenFutNet (OpenFutNet recovery boot) can read and write the EEPROM.
...