Page History

...

• follow the same procedure of  Cypress Generic USB Device Installation

• Check that EEPROM connection is enabled (EEPROM switch is set in a way to enable EPPROM connection to USB FX2 microcontroler);
  

  Warning
  EEPROM connection shall always be enabled during EEPROM programming.

  
  

• Cypress firmware update tools (Cypress USB Console recovery boot,Cypress USB Control Center recovery boot) and OpenFutNet (OpenFutNet recovery boot) can read and write the EEPROM.

  • For example using CyControl (Cypress USB Control Center)

  • For example using CyConsole (Cypress USB Console)
  • For example using OpenFutNet .recovery boot

See also Cypress USB Console recovery boot, Cypress USB Control Center recovery boot