You can use CyConsole ("Options" > "EZ-USB Interface" > "Download") or CyControl ("Program FX2 > RAM") to directly program the .iic Firmware file into the USB FX2 microcontroller's RAM.
...
Warning |
---|
If you don't also write the IIC EEPROM ("Options" > "EZ-USB Interface" > "Lg EEPROM" for CyConsole and "Program>FX2 64KB EEPROM" for CyControl), the new firmware is lost if the TE USB FX2 module goes under reset or power off/on cycle. |
Tip |
---|
If the TE USB FX2 module exit from reset or is powered on, the IIC EEPROM content programs/configures the USB FX2 microcontroller RAM |
...
Warning |
---|
The firmware actually changes (it runs on USB FX2 microcontroller's RAM) only when
|
...