Page History

CyConsole: write Firmware in the USB FX2 microcontroller's EEPROM and/or RAMA recovery boot  (aka TE USB FX2 firmware recovery) is a multi-step boot operation:

• follow the same procedure of  Cypress Generic USB Device Installation;

• check that EEPROM connection is enabled (EEPROM switch is set in a way to enable EPPROM connection to USB FX2 microcontroler);
  

  Warning
  EEPROM connection shall always be enabled during EEPROM programming.

• Cypress firmware update tools and OpenFutNet can read and write the EEPROM:

  1. 1. for example using CyControl (Cypress USB Control Center)

     2. for example using CyConsole (Cypress USB Console)
     3. for example using OpenFutNet recovery boot

...