changes.mady.by.user Sergio Pavesi
Saved on 15 09, 2013
...
1.) SET_INTERRUPT on MB_I2C_ADDRESS requesting I2C_BYTES
Byte
Value
Description
1
0xB0
SET_INTERRUPT command ID
2
0x3F
I2C Address MB_I2C_ADRESS=0x3F
3
0x0C
Number of bytes to write (max 32)
From 4 to 64
-
Not used
2.) I2C_WRITE with MB_Command FX22MB_REG0_GETVERSION at byte 7
0xAD
I2C_WRITE command ID
0x0C (12)
FX2_Parameters.I2C_BYTES=0x0C Number of bytes to write (max 32)
4
0x00
5
6
7
0x01
MB_Commands.FX22MB_REG0_GETVERSION It request to the MicroBlaze the return of 4 bytes representing FPGA firmware version
From 8 to 64
3.) GET_INTERRUPT
0xB1
GET_INTERRUPT command ID
From 2 to 64