Versions Compared

Old Version 7

changes.mady.by.user Sergio Pavesi

Saved on

compared with

New Version 8

changes.mady.by.user Sergio Pavesi

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Open CyConsole

Note

The firmware actually changes (it runs on USB FX2 microcontroller's RAM) only when

  • you reset the TE USB FX2 module;
  • you power off and power on the TE USB FX2 module;
  • you write the USB FX2 microcontroller's RAM (but the new firmware is lost if the TE USB FX2 module goes under reset or power off/on cycle).

...

Scroll pdf title
titleCyConsole starts
Recovery boot
Update/normal boot

EZ-USB Interface

To program the EEPROM and/or the RAM you should click "Option" and select "EZ-USB Interface".

Scroll pdf title
title"EZ-USB Interface" starts
Recovery boot
Update/normal boot

RAM programming

The .iic file can be succesfully downloaded in RAM but it doesn't actually work: if you desire to program RAM with .iic file you should use CyControl or OpenFutNet instead.

...

Note

The RAM can be programmed even if EEPROM switch is disabled.

If you don't also write the IIC EEPROM ("Options"  > "EZ-USB Interface" > "Lg EEPROM"), the new firmware is lost if the TE USB FX2 module goes under reset or power off/on cycle.

EEPROM programming

To program the Large (64K) EEPROM you should click "Lg EEPROM" button in "EZ-USB Interface" window and select the desired file to download.

...