Page History
- EN: Apply an GapFiller in at least approx. 2 mm thick GapFiller layer thickness to the following components:
DE: Auf folgende Bauteile eine Eine ca. 2mm dicke GapFiller-Schicht auf folgende Bauteile auftragen: - EN: Place Align KK0745-02 and press on modulelightly:
DE: KK0745-02 auf Modul platzierenausrichten und leicht anpressen: - EN: Fix the KK0745-02
Set the torque screwdriver at the assembly station to 0.5Nm.
the included
Insert the PH1 Philips crosshead bit and fix it crosswise from below withfour M3x6mm pan-head screws
with 0.
5Nm:
DE: KK0745-02 von unten mit den beigelegten M3x6mm Schrauben mit 0,5Nm fixieren:
Den Drehmomentschrauber am Montagepaltz auf 0,5Nm einstellen.
Das PH1 Philips Kreuzschlitzbit einlegen und mit vier M3x6mm Linsenkopfschrauben von unten überkreuz fixieren.
Overview
Content Tools