Page History
EN: Apply GapFiller in at least approx. 2 mm thickness to the following components:
DE: Eine ca. 2mm dicke GapFiller-Schicht auf folgende Bauteile auftragen:
EN: Align KK0729-02 and press on lightly:Scroll Pagebreak
DE: KK0729-02 ausrichten und leicht anpressen:Scroll Pagebreak - EN:
Set the torque screwdriver at the assembly station to 0.5Nm.
Insert the PH1 Philips crosshead bit and fix it crosswise from below with four M3x6mm pan-head screws.
DE:
Den Drehmomentschrauber am Montagepaltz auf 0,5Nm einstellen.
Das PH1 Philips Kreuzschlitzbit einlegen und mit vier M3x6mm Linsenkopfschrauben von unten überkreuz fixieren.
...
Overview
Content Tools