Page History
Table of Contents |
---|
Communicating with module
To communicate with the module, a serial COM-port with a speed set to 115200 bits needs to be opened. Commands consists of a single character in UTF-8 encoding. It is good practice to communication with the module following these steps:
...
These steps apply also for read operations.
Using the ADC for high speed consecutive measurements
The module provides a method to gather highly accurate consecutive ADC measurements in a single event. In this mode of operation, one mega sample of ADC values are performed and stored inside the modules SD-RAM.
...
Convert the RAW ADC data into standard integer values.
Brief ADC informations
Module TEI0015 / AD4003BCPZ-RL7
Resolution: 18-bit in 5 nibbles
Maximum sampling rate: 2 MSPS
Order of Values:
Hex | Dec | Hex | Dec | ||
---|---|---|---|---|---|
Mid scale | 0x00000 | 0 | |||
Positive 1 LSB | 0x00001 | 1 | to full scale -1 LSB | 0x1ffff | 131071 |
Negative full scale | 0x20000 | 131072 | to -1 LSB | 0x3FFFF | 262143 |
The layout of the ADC circuit is further described in the Analog Devices circuit note CN-0385.
Module TEI0016 / ADAQ7988 or ADAQ7980
Resolution: 16-bit in 4 nibbles
Maximum sampling rate: 0.5 MSps / 1 MSps
Order of Values:
Hex | Dec | Hex | Dec | ||
---|---|---|---|---|---|
Negative full scale is | 0x0000 | 0 | to -1 LSB | 0x7fff | 32767 |
Mid scale is | 0x8000 | 32768 | |||
Positive 1 LSB | 0x8001 | 32769 | to full scale | 0xffff | 65536 |
The layout of the ADC circuit is further described in the Analog Devices circuit note CN-0393.
Module TEI0023 / ADAQ4003BBCZ
Resolution: 18-bit in 5 nibbles
Maximum sampling rate: 2 MSPS
Order of Values:
Hex | Dec | Hex | Dec | ||
---|---|---|---|---|---|
Mid scale | 0x00000 | 0 | |||
Positive 1 LSB | 0x00001 | 1 | to full scale -1 LSB | 0x1ffff | 131071 |
Negative full scale | 0x20000 | 131072 | to -1 LSB | 0x3FFFF | 262143 |