...
| Scroll Title |
|---|
| anchor | Table_SIP_TPs |
|---|
| title | Test Points Information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Test Point | Signal | Connected to | Notes |
|---|
| TP1 | 5V | B2B, J17 |
| | TP2...3 | GND | GND |
| | TP4 | ADC0_VCM | B2B, J18 |
| | TP5 | ADC1_VCM | B2B, J18 |
| | TP6 | USB_VBUS | Micro USB2.0, J29 |
| | TP7 | UART0_RX | B2B, J17 |
| | TP8 | UART0_TX | B2B, J17 |
| | TP9 | ADC2_VCM | B2B, J18 |
| | TP10 | ADC3_VCM | B2B, J18 |
| | TP11 | ADC4_VCM | B2B, J18 |
| | TP12 | ADC5_VCM | B2B, J18 |
| | TP13 | ADC6_VCM | B2B, J18 |
| | TP14 | ADC7_VCM | B2B, J18 |
| | TP15 | PSBATT | Diode, D13 |
| | TP16 | CLKE_P | - |
| | TP17 | CLKE_N | - |
| | TP18 | CLKF_P | - |
| | TP19 | CLKF_N | - |
| | TP20 | CLKD_P | - |
| | TP21 | CLKD_N | - |
|
|
On-board Peripherals
| Page properties |
|---|
|
Notes : - add subsection for every component which is important for design, for example:
- Two 100 Mbit Ethernet Transciever PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
...
The configuration of FTDI FT2232H chip is pre-programmed on the EEPROM U9U15.
| Scroll Title |
|---|
| anchor | Table_OBP_FTDI |
|---|
| title | FTDI chip interfaces and pins |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| FTDI Chip U12 Pin | Signal Schematic Name | Connected to | Notes |
|---|
| ADBUS0 | JTAG_TCK | B2B, J17 Pin Header, J40 | JTAG interface | | ADBUS1 | JTAG_TDI | B2B, J17 Pin Header, J40 | | ADBUS2 | JTAG_TDO | B2B, J17 Pin Header, J40 | | ADBUS3 | JTAG_TMS | B2B, J17 Pin Header, J40 | | BDBUS0 | UART0_RX | B2B, J17 | UART | | BDBUS1 | UART0_TX | B2B, J17 | UART | | EECS/EECLK/EEDATA | BDBUS2 | EEPROM, U15 | FTDI configuration | | DM/DP | D_N/D_P | Micro USB2.0, J29 | FTDI Input |
|
...
| Scroll Title |
|---|
| anchor | Table_OBP_PCLK |
|---|
| title | Programmable Clock Generator Inputs and Outputs |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
U5 Pin
| Signal | Connected to | Direction | Note |
|---|
| IN0 | CLKIN0 | Oscillator, U6 | Input |
| | IN1 | CLKIN1 | UMCC Connector, J36 | Input |
| | IN2 | CLKIN2 | UMCC Connector, J37 | Input |
| | IN3 | FB | Programmable Clock Generator, U5 | Input/Output |
| | XA/XB | CLK0_XA/XB | Oscillator, Y1 | Input |
| | IN_SEL0...1 | DSPLL0_SEL0...1 | I2C Switch, U7 DIP Switch, S2 | Input |
| | nINTR | DSPLL0_INTR_N | I2C Switch, U7 | Input |
| | nLOL | DSPLL0_LOL_N | Green LED, D12 | Input |
| | nRST | DSPLL0_RST_N | 1.8 V | Input |
| | SCLK | DSPLL0_SCL | I2C Switch, U7 | Input |
| | SDA/SDIO | DSPLL0_SDA | I2C Switch, U7 Pin Header, J41 | In/Out |
| | INTR | PLL_INTR_N | B2B, J17 | Output |
| | OUT0A | CLKOUT0A | B2B, J17 | Output |
| | OUT0 | CLKOUT0_P | B2B, J17 | Output |
| | OUT1 | PLLCLK1 | UMMC, J27 | Output |
| | OUT2 | PLLCLK2 | UMMC, J20 | Output |
| | OUT3 | PLLCLK3 | UMMC, J32 | Output |
| | OUT4 | PLLCLK4 | UMMC, J33 | Output |
| | OUT5 | PLLCLK5 | UMMC, J34 | Output |
| | OUT6 | PLLCLK6 | UMMC, J35 | Output |
| | OUT7 | CLKOUT7 | UMMC, J38 | Output |
| | OUT8 | CLKOUT8 | UMMC, J42 | Output |
| | OUT9 | CLKOUT9 | UMMC, J43 | Output |
| | OUT9A | CLKOUT9A | Programmable Clo0ck Clock Generator, U5 | Output |
|
|
Power and Power-On Sequence
...