Page History
...
Impact: None. Minor changes in electrical characteristics.
#12 Changed MEMS oscillator SiT8008AI-73-XXS-25.000000E (U15, U21) to SiT8008BI-73-XXS-25.000000E.
Type: Schematic Change
Reason: Not recommended for new design of component.
Impact: None. Minor changes in electrical characteristics.
#13 Added optional MEMS LVDS Oscillators (Y2, Y3, Y4, Y5).
Type: Schematic Change
Reason: BOM Optimization.
Impact: None. Minor changes in electrical characteristics.
...
#14 Removed voltage divider resistors
...
for DDR3 SDRAM (U12, U13) reference voltages.
Type: Schematic Change
Reason: BOM Optimization.
Impact: None. Minor changes in electrical characteristics.
...
#15 Added resistor options
...
for REFCLK_EMIF clock (signals "REFCLK_EMIF_P"/"REFCLK_EMIF_N") for common mode voltage setting.
Type: Schematic Change
Reason: Optionally common mode voltage setting.
Impact: None. Minor changes in electrical characteristics.
...
#16 Changed I2C bus connection for CryptoAuthentication Device (U19) from 1.8 V bus "I2C" to 3.3 V bus "I2C1".
Type: Schematic Change
Reason: Simplify power handling.
Impact: Firmwares with CryptoAuthentication Device (U19) usage needs to be adapted.
...
#17 Added diode (D5) to power Cyclone 10 VCCBAT power supply either from 1.8 V module power rail or from baseboard via signal "VCCBAT".
Type: Schematic Change
Reason: Simplify VCCBAT/reset handling.
Impact: Check power sequencing and reset handling for your use case.
#18 Changed LED LTST-C191KRKT (D1) to 19-213/R6C-AL1M2VY/3T.
Type: Schematic Change
Reason: Not recommended for new design of component.
Impact: None.
#19 Changed LED LTST-C191KGKT (D2, D3, D4) to 19-213/G6C-BM1N2/DT.
Type: Schematic Change
Reason: Not recommended for new design of component.
Impact: None.
#20 Added testpoint (TP21) for signal "PG_3.3V".
Type: Schematic Change
Reason: Improve debugging possibility.
Impact: None.
#21 Added testpoint (TP22) for signal "PG_VADJ".
Type: Schematic Change
Reason: Improve debugging possibility.
Impact: None.
#22 Changed ferrid bead BKP0603HS121-T (L13) to MPZ0603S121HT000.
Type: Schematic Change
Reason: EOL of component.
Impact: None.
#23 Updated components from library.
Type: Schematic Change
Reason: Use latest component data.
Impact: None.
#24 Added UKCA logo.
Type: PCB Change
Reason: Requiered for export to UK.
Impact: None.
#25 Added system overview and power diagram. Updated page count and order.
Type: Documentation Update
Reason: Documentation improvement.
Impact: None.
Scroll Pagebreak |
---|
Method of Identification
...