Page History
...
- Apply Gap Filler in at least approx. 2 mm thickness to the following components:
inc-drawio border true diagramName TE0813-0102-GapFillerGapfiller includedDiagram 1 simpleViewer true width 400 links auto tbstyle top pageId 195203434 diagramDisplayName lbox true diagramWidth 2074 revision 1 - Carefully align the heatspreader and press it lightly.
inc-drawio border true pageId195203434 diagramDisplayName lbox true revision 1 diagramName TE0813-02mit33856 aspect GPr4BmzI2cbo72dIBcdC 1 includedDiagram 1 simpleViewer true width 600 aspectHash d687db1d7b78196e807408d5ab977cf59bfad969 links auto tbstyle top diagramWidth 1153 Set the torque screwdriver to 0.5Nm / 4.5 inlb.
Insert the Philips crosshead bit PH1.
Fasten the heatspreader crosswise from below with the four M3 × 6 mm pan-head screws.
inc-drawio border true pageId 195203434 diagramDisplayName lbox true diagramName TE0813TE813-02mit33856bottom aspect veWVOmRvpG8wNeCd_lW- 1 includedDiagram 1 simpleViewer true width 400 aspectHash450ff7ae4051639d0e6ace82925d059592b56466 links auto tbstyle top diagramDisplayName lbox true diagramWidth 958 revision 1
Include Page | ||||
---|---|---|---|---|
|
...
Overview
Content Tools