Page History
...
Affected Product | Replacement |
---|---|
TE | TE |
Changes
#3 Changed DCDC EN5311QI (U24, U25, U26) to
...
MPM3834C and adapted power circuit.
Type: Schematic Change
Reason: EOL of Component.
Impact: None. Increased current output capability. Minor changes in electrical characteristics.
#1 Changed
...
DCDC EN6347QI (U23)
...
to MPM3860GQW-Z and adapted power circuit.
Type: Schematic Change
Reason: EOL of Component.
Impact: None. Increased current output capability. Minor changes in electrical characteristics.
#4 Changed load
...
switch TPS27082LDDCR (Q1)
...
to MP5077GG-Z and adapted circuit.
Type: Schematic Change
Reason: BOM Optimization.
...
Reason: EOL of Component.
Impact: None.
#1 Changed power net name from 1.5V to DDR_VDD.
Type: Schematic Change
Reason: Improve name handling.
Impact: None.
#8 Changed power sequencing.
Type: Schematic Change
Reason: Follow AMD and Texas Instruments recommendation.
Impact: Voltage rails start in other order. Voltage supervisor (U4) enables 1V voltage rail (DCDC U23) via signal EN_Module. 1V DCDC (U23) enables 1.8V voltage rail (DCDC U25) via signal PG_1V0. 1.8V DCDC (U25) enables 2.5V (DCDC U24) and DDR_VDD (DCDC U26) voltage rails via signal PG_1V8. Voltage rail 3.3V (load switch Q1) is logical AND-enabled via power good signal PG_2V5_3V3 from voltage rail 2.5V DCDC (U24) and DDR_VDD DCDC (U26) via diode (D4) and CPLD (U6) signal EN_3V3 via diode (D5).
#10 Added additional decoupling capacitors C166...C179.
Type: Schematic Change
Reason: Improve decoupling.
Impact: None.
#10 Added level shifter (
...
U7) and capacitors (C185, C186) to separate power domains for signal FPGA_IO. Added fallback resistor (R91).
Type: Schematic Change
Reason: Improve power domain handling for signal FPGA_IO.
...
Reason: Improve thermal situation.
Impact: None.
...
#10 Added additional decoupling capacitors C166...C179.
Type: Schematic Change
Reason: Improve name handlingdecoupling.
Impact: None.
#1 Pulled-up board revision signal (FPGA U2 pin H17) and updated board revision documentation.
...
Impact: None. Firmware reflects it but custom firmware needs to be updated by customer.
#19 Added revision history, block and power diagram. Updated page count and order.
Type: Documentation Update
Reason: Documentation improvement.
Impact: None.
#11 Changed fiducials to standard fiducial type.
...
Reason: Required for manufacturing.
Impact: None.
#19 Added revision history, block and power diagram. Updated page count and order.
Type: Documentation Update
Reason: Documentation improvement.
Impact: None.
Scroll Pagebreak |
---|
Method of Identification
...