Page History
...
Reason: Follow AMD recommendation.
Impact: None.
...
#8 Changed diode (D3) from BAT54VV,115 to two separated diodes (D2, D3) BAT54A,215.
Type: Schematic Change
Reason: BOM optimization.
Impact: None.
...
#9 Changed 2.2 kOhm resistors (R56, R57, R58) to 2.4 kOhm.
Type: BOM Change
Reason: Follow AMD recommendation.
Impact: None.
...
#10 Pulled-down board revision signal "BR0" (FPGA U5, pin P17) and updated board revision documentation.
Type: Schematic Change
Reason: Update revision information.
Impact: None. Custom design needs to be updated by customer in cases where board revision signals are used.
...
#11 Added testpoints (TP11...TP14, TP23...TP28).
Type: PCB Change
Reason: Improve voltage and system monitoring.
Impact: None.
...
#12 Changed fiducials to standard fiducial type.
Type: Schematic Change
Reason: Use standard fiducials.
Impact: None.
...
#13 Changed stacked vias to staggered vias.
Type: PCB Change
Reason: Reliability improvement.
Impact: Reliablity improvement.
...
#14 Signal trace lengths changed.
Type: PCB change
Reason: Result of changes above.
Impact: Changed trace length have to be taken into account in existing designs.
...
#15 Updated B2B documentation.
Type: Documentation Update
Reason: Documentation Improvement.
Impact: None.
...
#16 Renamed document sheets.
Type: Documentation Update
Reason: Documentation Improvement.
Impact: None.
...
#17 Updated legal notices, revision history, block and power diagram. Updated page count and order.
Type: Documentation Update
...