Page History

...

1. Apply Gap Filler in at least approx. 2 mm thickness to the following components:
   

   inc-drawio
   pageId border falsetrue diagramName TE0803-04-Gap-Filler includedDiagram 1_PD simpleViewer truefalse width 400 links auto tbstyle top lbox true 192446917 diagramWidthdiagramDisplayName 2286 lboxrevision true1

2. Carefully align the heatspreader and press it lightly.
   

   inc-drawio
   1 border true pageId 192446917 diagramDisplayName lbox true diagramName KK0803-04AaufTE080304aufTE0803-04_PD aspectsimpleViewer GPr4BmzI2cbo72dIBcdC 1false includedDiagramwidth linkssimpleViewer autotrue tbstylewidth top600 lboxaspectHash trued687db1d7b78196e807408d5ab977cf59bfad969 diagramWidthlinks 1208auto revision tbstyle top1

3. Set the torque screwdriver to 0.5Nm / 4.5 inlb.

4. Insert the Philips crosshead bit PH1.

5. Fasten the heatspreader crosswise from below with the four M3 × 6 mm pan-head screws.
   (Fig. TE0808-05, similar.)
   
   

   Embed draw.io Diagram
   border true pageId 131728215 diagramDisplayName lbox true diagramName TE0808-05-KK-Schrrauben aspect veWVOmRvpG8wNeCd_lW- 1 includedDiagram 1 simpleViewer true width 400 aspectHash 450ff7ae4051639d0e6ace82925d059592b56466 links auto tbstyle top

...