Page History

...

Impact: None. Changed package.

#5 Changed MEMS oscillator (U7) from SiT8008AI-73-XXS-12.000000E to SiT8008BI-73-XXS-12.000000E.

Type: Schematic Change

Reason: EOL of Component.

Impact: None. Clock revision changed.

#5 Changed MEMS oscillator (U14) from SiT8008AI-73-XXS-33.333333E to SiT8008BI-73-XXS-33.333333E.

Type: BOM change

Reason: EOL of Component.

Impact: None. Clock revision changed.

#2 Changed MEMS oscillator (U15) from SiT8008AI-73-XXS-52.000000E to SiT8008BI-73-XXS-52.000000E

Type: BOM change

Reason: EOL of Component.

Impact: None. Clock revision changed.

#3 Changed SoC (U1) bank 35 power supply from 1.8 V to 3.3 V.

...

Reason:EOL of component.

Impact: None.

#7 Changed LED (D1 ... D3) from 150060VS75000 to 19-213/G6C-BM1N2/DT.

Type: Schematic Change

Reason:BOM Optimization.

Impact: None.

#8 Renamed signal name from "SPI-DQ0/M0" to "SPI-DQ0/M3".

...

Reason: Use AMD boot mode name convention.

Impact: None.

#9 Added pull-up resistor assembly option (R20) (default: not fitted) for signal "DDR3-CKE".

Type: Schematic Change

Reason: Follow AMD recommendation.

Impact: None.

#10 Added additional decoupling capacitors C52, C53, C73, C85. 

...

Reason: Follow AMD recommendation.

Impact: None.

#11 Changed capacitor (C55, C56) from 470 nF, 0201 to 47 µF, 0603.

Type: Schematic Change

Reason: Follow AMD recommendation.

Impact: None.

#11 Changed capacitor (C51) from 470 nF, 0201 to 10 µF, 0402.

Type: Schematic Change

Reason: Follow AMD recommendation.

Impact: None.

#11 Changed capacitor (C1, C4, C12, C15, C18, C19, C24, C35, C57, C63, C65, C79, C81, C87, C89) from 4.7 µF to 10 µF.

...

Reason: Follow AMD recommendation.

Impact: None.

#11 Changed 10 µF capacitor (C10, C25) from 10 V, 0805 to 6.3 V, 0402.

Type: Schematic Change

Reason: BOM Optimization. (???)

Impact: None.

#12 Changed capacitor (C29, C32, C33, C41, C42, C43, C44, C47) from 10 µF, 0402 to 22 µF, 0603.

...

Reason: Follow AMD recommendation.

Impact: None.

#2 Changed testpoint (TP1, TP3, TP5, TP7) from 1 mm to 0.8 mm diameter.

Type: PCB Change

Reason: Harmonize testpoints.

Impact: None.

#15 Added block and power diagram.

...