Page History

...

3. L3, L5 Ferrit beads BKP0603HS121-T replaced with MPZ0603S121HT000.

4. EOL component J9 was replaced.

5. Pin Headers J10 - J13 were replaced.

6. EOL component U3 (EN5311QI) was replaced with MPM3834CGPA-Z.

7. EOL component U1 (EN6347QI) was replaced with MPM3860GQW-Z.

8. Added Diode D1, D2 for USB ESD protection.

9. Eth Phy Powersupply modified: L1, R27 removed from shematic; for U6 DVDD supply used internal LDOs.

10. Q1 (TPS27081ADDCR) was replaced with MP5077GG-Z. 

11. EOL component J4 micro SD Card was replaced.

12. Added testpoints TP1 - TP9.

13. Added series terminator R27 to avoid ringing effect.

14. The signals were renamed:

      - VCCIOB ---> VCCIOC,

      - VCCIOC ---> VCCIOD

according to Trenz Module Connection Table.

15. Added Legal Notices page.

16. Added Power diagram page.

17. Added Block diagramm.

18. Addes series terminators R50-55 to avoid ringing effect.

19. PGOOD connected to S1-1 DIP Switch and pulled-up by resistor R56 to 3.3V.

20. Added a pull-up resistor R57 on RESIN. Not all 4x5 modules have internal pull-up for this pin on the module.

21. Added mechanical components:

      - Screw M3x6 (2 pcs.); 

      - Standoff M3x10;

      - U2 - TE0790-03 XMOD FTDI JTAG Adapter;

      - J14 - J18 -  Jumpers 2,54mm Pitch.

Changes

#13 Removed track-it traceability pad S/N. (???)

Type: Schematic Change

Reason: EOL of Component.

Impact: None.

#15 Updated components from library.

Type: Schematic Change

Reason: Use latest component data.

Impact: None.

#11 Changed inductor (L3, L5) from BKP0603HS121-T to MPZ0603S121HT000.

Type: BOM Change

Reason:EOL of component.

Impact: None.

#11 Changed pin header (J9 ...

Type: BOM Change

Reason:EOL of component.

Impact: None.

#1

Type:

Reason: 

Impact:

...