Versions Compared

Old Version 4

changes.mady.by.user ED

Saved on

compared with

New Version 5

changes.mady.by.user ED

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

CompanyTrenz Electronic GmbH
PCN NumberPCN-20240619
TitleTE0715-05 SI5338 Change
SubjectBOM OTP Change
Issue Date

2024-07-01

...

This change affects all Trenz Electronic TE0715-05 with a serial number greater than 886100.

Changes

#1 SI5338

...

OTP content update

Changes:

    1. New

...

    1. ClockBuilder Pro version (4.10) is used

...

    1. . This leads to parameter change # FDBK Mux = NoClk instead of # FDBK Mux = RefClk

...

    1. .
    2. Enable optional FPGA Fabric clock CLK2 125 MHz with LVDS18.
    3. Enable optional FPGA Fabric clock CLK3A 50 MHz with CMOS18.

    4. Set I2C voltage to 2.5V/3.3V instead of 1.8V

Type: Firmware Change

Reason: Improved PLL settings.

Impact:  One additional single ended Additional clock is available . Minor changes in electrical characteristics. Settings are saved in NVMon Bank 34 IO_L9N, Pin K2.

Scroll Pagebreak

Method of Identification

...