Page History

...

Table of content

Important Note

...

Warning
Modules produced after June 2020 are no longer compatible with the old older drivers. Please install driver version 2.4 or newer See also driver revision change history: Revisionchangehistory

Download Setup Files

• Arrow USB Programmer Setup Libraries

...

• 2.3 to 2.4

  • Bug fix. Adding or removing programmer hardware after JTAG server (re-)startcould lead to a mix-up of ports. Furthermore, devices not longer connected could still be displayed in Quartus programmer.

  • The port name in Quartus programmer is not USBx anymore but the FTDI USB Serial Number, e.g. AR1G48Z5 or 498069.

  • For modules which will be produced after June 2020:

    • FTDI serial number consists of prefix AR and module serial number which is also displayed on the sticker with QR code on the board. Also Module Series name is shown in Quartus:
      

      Expand
      title Quartus Beispiel...

      
      

    • FTDI serial number of the DAQ modules consits of prefix AD module serial number which is also displayed on the sticker with QR code on the board. Also Module Series name is not shown in Quartus at the moment (this feature will be enabled later for this series)

• 2.2 to 2.3

  • winOS: add32 bit version of FTDI USB driver
  • LinuxOS:
    • rules file removed
    • readme explains basics about VCP issue

• 2.1 to 2.2

  • the frequency of the JTAG clock TCK can be set and queried via the command line tool jtagconfig from Intel

  • the standard TCK frequency is 20 MHz instead of 6 MHz

  • it is now possible to program non-volatile keys into an FPGA

  • In the Windows version, the current USB drivers of FTDI are copied to the installation directory.

  • In the Linux Version, new installation description and rules file

    
    

...