Page History
...
The Trenz Electronic TE0722-02 is a DIPFORTy1 "Soft Propeller" based on the Xilinx ZYNQZynq-7000 SoC.
Key Features
- Xilinx Zynq XC7Z010 SoC
- Dual core ARM A9+
- 16 MByte QSPI Flash
- Micro SD Card socket with card detect signal
- 34 I/Os on DIP40 header pins
- System status LED (DONE)
- RGB LED connected to PL I/O
- Green user LED connected to ARM CPU GPIO
- Proximity and ambient light sensor
- DIP40 form factor (size 18 x 51 mm)
Additional assembly options are available for cost or performance optimization upon request.
Block Diagram
Main Components
- Xilinx ZYNQ XC7Z010 SoC, U1
- Micro SD card socket with card detect, J8
- Red LED, D3
- Green LED, D2
- Red LED, D6
- 20-pin connector placeholder, P1
- Red LED, D5
- Proximity/ambient light sensor, U4
- RGB LED, D4
- Red LED, D1
- 20-pin connector placeholder, P2
- Ultra-low supply-current voltage monitor, U4
- 2 x 5-pin connector placeholder, J1
- 2 x 5-pin connector placeholder, J2
- 2 x 5-pin connector placeholder, J3
- 16 MByte QSPI Flash memory, U5
- Low power programmable oscillator @ 33.333333 MHz, U8
- 1A PowerSoC DC-DC converter (1.0V), U2
- 1A PowerSoC DC-DC converter (1.8V), U3
Key Features
...
...
Additional assembly options are available for cost or performance optimization upon request.
Initial Delivery State
Storage device name | Content | Notes |
|---|---|---|
QSPI Flash | Empty |
Signals, Interfaces and Pins
I/O Signals
List Overview of the signals between PL I/O banks and external connectors:
...
| MIO | Function | Connector Pin | Notes |
|---|---|---|---|
| 0 | - | - | - |
| 1 | QSPI | - | SPI Flash-CS |
| 2 | QSPI | - | SPI Flash-DQ0 |
| 3 | QSPI | - | SPI Flash-DQ1 |
| 4 | QSPI | - | SPI Flash-DQ2 |
| 5 | QSPI | - | SPI Flash-DQ3 |
| 6 | QSPI | - | SPI Flash-SCK |
| 7 | GPIO | - | Green LED D2 |
| 8 | - | - | - |
| 9 | - | - | - |
| 28 | SD CARD | J8-5 | CLK |
| 29 | SD CARD | J8-3 | CMD |
| 30 | SD CARD | J8-7 | DAT0 |
| 31 | SD CARD | J8-8 | DAT1 |
| 32 | SD CARD | J8-1 | DAT2 |
| 33 | SD CARD | J8-2 | CD/DAT3 |
| 36 | I2C | - | SCL |
| 37 | I2C | - | SDA |
| 39 | GPIO | - | Si1143 INT pin |
| 49 | SD CARD | J8-G4 | Card detect switch |
I2C Interface
On-board I2C I2C interface is provided via ZYNQ Zynq SoC's PS bank 501 pins MIO36 (SCL) and MIO37 (SDA). I2C addresses for on-board devices are listed in the table below:
| I2C I2C Device | I2C Slave Address | Notes |
|---|---|---|
| Si1143-A11-GMR | 0x5A | Proximity and ambient light sensor. |
...
Module size: 18 mm × 51 mm. Please download the assembly diagram for exact numbers.
PCB thickness: 1.6 mm.
Highest part on PCB : approx. 4 mm. Please download the step model for exact numbers.
...
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Weight
... g - Plain module
... g - Set of bolts and nuts
Revision History
Hardware Revision History
...
Overview
Content Tools