Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Xilinx Zynq XC7Z010 SoC
  • Dual-core ARM A9+ (TE0722-02-07S-1C variant has single-core ARM A9+)
  • 16 MByte QSPI quad SPI Flash
  • Micro SD Card socket with card detect signal
  • 34 I/Os on DIP40 header pins
  • System status LED (DONE)
  • RGB LED connected to PL I/O
  • Green user LED connected to ARM CPU GPIO
  • Proximity and ambient light sensor
  • DIP40 form factor (size 18 x 51 mm)

...

  1. Xilinx Zynq XC7Z010 or Zynq XC7Z007S SoC, U1
  2. Micro SD card socket with card detect, J8
  3. Red LED, D3
  4. Green LED, D2
  5. Red LED, D6
  6. 20-pin connector placeholder, P1
  7. Red LED, D5
  8. Proximity/ambient light sensor, U4
  9. RGB LED, D4
  10. Red LED, D1
  11. 20-pin connector placeholder, P2
  12. Ultra-low supply-current voltage monitor, U4
  13. 2 x 5-pin connector placeholder, J1
  14. 2 x 5-pin connector placeholder, J2
  15. 2 x 5-pin connector placeholder, J3
  16. 16 MByte QSPI Flash memory, U5
  17. Low-power programmable oscillator @ 33.333333 MHz, U8
  18. 1A PowerSoC DC-DC converter (1.0V), U2
  19. 1A PowerSoC DC-DC converter (1.8V), U3

...

JTAG Signal

J2 Connector Pin

TCK 4
TDI 9
TDO 10
TMS 8

Table 4: JTAG interface signals.

Quad SPI Interface

Quad SPI Flash (U5) is connected to the Zynq PS QSPI0 interface via PS MIO bank 500, pins MIO1 ... MIO6.

Zynq SoC's MIOSignal NameU5 Pin
1SPI0_CS1
2SPI0_DQ0/MIO25
3SPI0_DQ1/MIO32
4SPI0_DQ2/MIO43
5SPI0_DQ3/MIO57
6SPI0_SCK6

Table 3: Quad SPI interface signals and connections.

SD Card Interface

TE0723 module has on-board 3.3V SD Card socket (J10) with card detect switch wired to the SoC PS MIO bank 500.

Zynq SoC's PinConnected ToSignal Name
MIO0J10-9Card detect switch
MIO10J10-7DAT0
MIO11J10-3CMD
MIO12J10-5CLK
MIO13J10-8DAT1
MIO14J10-1DAT3
MIO15J10-2CD/DAT3

Table 4: SD card socket signals.

I2C Interface

I2C interface pins SCL and SDA from the Zynq SoC PL bank 34 are connected to the connector J1. There are no on-board I2C slave devices.

Zynq SoC's PinConnected ToSignal Name
R13J1-9SDA
P13J1-10SCL

Table 7: Zynq SoC I2C interface.

I2C Interface

I2C interface pins SCL and SDA from the Zynq SoC PL bank 34 are connected to the connector J1. There are no on-board I2C slave devices.

Zynq SoC's PinConnected ToSignal Name
R13J1-9SDA
P13J1-10SCL

Table 7: Zynq SoC I2C interface.



Default PS MIO Mapping

MIOFunctionConnector PinNotes
0---
1QSPI-SPI Flash-CS
2QSPI-SPI Flash-DQ0
3QSPI-SPI Flash-DQ1
4QSPI-SPI Flash-DQ2
5QSPI-SPI Flash-DQ3
6QSPI-SPI Flash-SCK
7GPIO-Green LED D2
8---
9---
28SD CARDJ8-5CLK
29SD CARDJ8-3CMD
30SD CARDJ8-7DAT0
31SD CARDJ8-8DAT1
32SD CARDJ8-1DAT2
33SD CARDJ8-2CD/DAT3
36I2C-SCL
37I2C-SDA
39GPIO-Si1143 INT pin
49SD CARDJ8-G4Card detect switch

Table 5: .

I2C Interface

On-board I2C interface is provided via Zynq SoC's PS bank 501 pins MIO36 (SCL) and MIO37 (SDA). I2C addresses for on-board devices are listed in the table below:

...

 

 Table 6: .

On-board Peripherals

Quad SPI Flash Memory

...