| Label | Designator | Color | Usage | Description |
|---|
| Overview - 2 | D7 | Red | status |
| Priority | Description | Blink sequencing |
|---|
| 1 | PS POR Reset pressed long time (or whole system is powered off) | ON | | 2 | PS Soft Reset pressed short time | OFF | | 3 | SD Boot | *ooooooo | | 4 | QSPI Boot | **oooooo | | 5 | eMMC Boot | ***ooooo | | 6 | PJTAG Boot | ****oooo | | 7 | JTAG Boot | *****ooo | | 8 | Error | ******** (fast blinking) |
|
| Overview - 2 | D6 | Green | status |
| Priority | Description | Blink sequencing |
|---|
| 1 | Power OFF | ******** (fast blinking) | | 2 | PG_LPD low | *****ooo | | 3 | PG_FPD low | ****oooo | | 4 | PG_PL low | ***ooooo | | 5 | PG_DDR low or PG_PSGT low or PG_PLL low or PG_GT_L low or PG_GT_R low | **oooooo | | 6 | POK_1V8 low or POK_FMC low or perihpery_pg low or (Main Power State Machine Ready and FMC Sanity check low) | *ooooooo | | 7 | Main Power State Machine Ready | OFF | | 8 | ERROR some power failed, see XMOD LEDs | ON |
|
| Overview - 6 | J10 Power LED | Blue (symbol light bulb) | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | power button pressed long time forced power down | ******** (fast blinking) | | 2 | Main Power State Machine Idle and Power of State | ******** (slow blinking) | | 3 | power button pressed short time power to power on/off | *****ooo | | 4 | PS reset button pressed long time | ****oooo | | 5 | PS reset button pressed short time | ***ooooo | | 6 | power down sequencing is running | **oooooo | | 7 | whole system hold into reset | *ooooooo | | 8 | MIO40 | User Defined |
|
| Overview - 6 | J10 HD LED | Red (symbol drive) | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | PS Init is low | ******** (fast blinking) | | 2 | PS Error High | *****ooo | | 3 | PS Error Status High | ****oooo | | 4 | SOC Done low | ***ooooo | | 5 | SC0 | User Defined |
|
| Overview - 8 | XMOD1 D4 | Red | status |
| Priority | XMOD Button | Description | Blink sequencing |
|---|
| 1 | Pressed | Main Power State Machine Ready, but FMC Sanity check failed | ******** (fast blinking) | | 2 | Pressed | PS State Machine PS LPD ON/OFF | *ooooooo | | 3 | Pressed | PS State Machine PS FPD ON/OFF | **oooooo | | 4 | Pressed | PS State Machine PS DDR,GT,PLL ON/OFF | ***ooooo | | 5 | Pressed | PL State Machine PL and PL GT ON/OFF | ****oooo | | 6 | Pressed | PS Init low | ON | | 1 | Unpressed | Main Power State Machine ATX ON/OFF | *ooooooo | | 2 | Unpressed | Main Power State Machine 5V ON/OFF | **oooooo | | 3 | Unpressed | Main Power State Machine Module ON/OFF | ***ooooo | | 4 | Unpressed | Main Power State Machine 1.8V ON/OFF | ****oooo | | 5 | Unpressed | Main Power State Machine 3.3V and VADJ ON/OFF | *****ooo | | 6 | Unpressed | Main Power State Machine Wait Ready ON/OFF | ******** (fast blinking) | | 7 | Unpressed | PS Init low | ON | | x | Pressed/Unpressed | all fine | OFF |
|
| Overview - 9 | XMOD2 D4 | Red | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | Power On Reset | ******** (slow blinking) | | 2 | PS Init low | ******** (fast blinking) | | 3 | SC17 | User Defined |
|
| Overview - 12 | SFP D1 | Red | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | Power On Reset | ******** (slow blinking) | | 2 | PS Init low | ******** (fast blinking) | | 3 | RGPIO(0), when RGPIO Enabled over FPGA | User Defined | | 4 | -- | OFF |
|
| Overview - 13 | SFP D8 | Green | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | Power On Reset | ******** (slow blinking) | | 2 | PS Init low | ******** (fast blinking) | | 3 | RGPIO(1), when RGPIO Enabled over FPGA | User Defined | | 4 | -- | OFF |
|
| Overview - 14 | D17 - USB HUB LED (Suspend) | Green | status | ON, no USB connected, OFF, USB connected |
| Overview - 15 | SFP D9 | Red | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | Power On Reset | ******** (slow blinking) | | 2 | PS Init low | ******** (fast blinking) | | 3 | RGPIO(2), when RGPIO Enabled over FPGA | User Defined | | 4 | -- | OFF |
|
| Overview - 1516 | SFP D10 | Green | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | Power On Reset | ******** (slow blinking) | | 2 | PS Init low | ******** (fast blinking) | | 3 | RGPIO(3), when RGPIO Enabled over FPGA | User Defined | | 4 | -- | OFF |
|
| Overview - 1617 | ETH J7 | Yellow | status |
| Priority | Description | Blink sequencing |
|---|
| 1 | Power On Reset | ******** (slow blinking) | | 2 | PS Init low | ******** (fast blinking) | | 3 | ETH PHY LED | (not PHY_LED0) |
|
| Overview - 1718 | ETH J7 | Green/Orange | status |
| Priority | Description | Blink sequencing |
|---|
| 1 | Power On Reset | ******** (slow blinking) | | 2 | PS Init low | ******** (fast blinking) | | 3 | ETH PHY LED | (PHY_LED1) |
|
| Overview - 1819 | D4 | Green | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | 1.8V disabled, inter CPLD RGPIO is disabled | ******** (fast blinking) | | 2 | 1.8V enabled, inter CPLD RGPIO is disabled | *****ooo | | 3 | Power On Reset | ****oooo | | 4 | USB Reset | ***ooooo | | 5 | RGPIO(4), when RGPIO Enabled over FPGA | User Defined | | 6 | all fine | *ooooooo |
|
| Overview - 1819 | D5 | Red | status/user |
| Priority | Description | Blink sequencing |
|---|
| 1 | 1.8V disabled, inter CPLD RGPIO is disabled | ******** (fast blinking) | | 2 | 1.8V enabled, inter CPLD RGPIO is disabled | *****ooo | | 3 | Power On Reset | ****oooo | | 4 | PCie Reset | ***ooooo | | 5 | RGPIO(4), when RGPIO Enabled over FPGA | User Defined | | 6 | all fine | *ooooooo |
|
