Page History

...

• PetaLinux Working Environment (see UG1144)
  • PetaLinux Tools Installation is completed.
  • "/bin/sh" is bash
  • Set Working Environment:
    • $ source <path-to-installed-PetaLinux>/settings.sh
  • Set cross compiler:
    • $ export CROSS_COMPILE=arm-xilinx-linux-gnueabi-
    • $ export ARCH=arm
• Create a New Project (see UG1144):
  • $ petalinux-create --type project --template <CPU_TYPE> --name <PROJECT_NAME>
    • <CPU_TYPE>: zynqMP, zynq, microblaze
    • <PROJECT_NAME>:The name of the project you are building
• Import Hardware Configuration (see UG1144):
  • Export Hardware Definition File (*.hdf) from the Vivado Project into the PetaLinux subfolder "<plnx-proj-root>/hw-description":
    • change to the hardware description folder:
    • Run:$ petalinux-config --get-hw-description
• (optional) Configure your PetaLinux:
  • While anywhere in the project folder tree:
  • Run:$ petalinux-config
    • It's recommended to deactivate FSBL-Configuration and build FSBL and Boot.bin with SDK/HSI: "linux Components Selection --->" "[ ] First Stage Bootloader"
  • Run:$ petalinux-config -c kernel
  • Run:$ petalinux-config -c rootfs
• Build System Image (see UG1144):
  • While anywhere in the project folder tree:
  • Run:$ petalinux-build
  • Build log-file:"<plnx-proj-root>/build/build.log"
• Take u-boot.elf and image.ub from "<plnx-proj-root>/images/linux" and make BOOT.BIN.  It is recommended to create the FSBL with SDK/HSI tools.

...