...
CPLD Device: LCMX02-256HC. Firmware with Standard DIPFORTY Configuration for XMOD.
Note |
---|
This firmware is for XMOD with usage on TE0722-DIPFORTY only! |
JTAG routing
...
Name / opt. VHD Name | Direction | Pin | Description |
---|---|---|---|
A | inout | 8 | XMOD Pin Header / UART RXD (input to adapter)TCK |
ACBUS4 | 27 | FTDI / currently_not_used | |
ACBUS5 | 28 | FTDI / currently_not_used | |
ADBUS4 | 5 | FTDI / currently_not_used | |
B | out | 12 | XMOD Pin Header / UART TXD (output from adapter)TMS |
BDBUS2 | in | 21 | FTDI / currently_not_used |
BDBUS3 | out | 20 | FTDI / currently_not_used |
C | outin | 9 | XMOD Pin Header / UART RXD (input to adapter) |
D | inout | 11 | XMOD Pin Header / UART TXD (output from adapter) |
E | in | 14 | XMOD Pin Header / TDO |
F | out | 13 | XMOD Pin Header / TDI |
FT_B_RX / BDBUS1 | out | 25 | FTDI |
FT_B_TX / BDBUS0 | in | 23 | FTDI |
G | in | 17 | XMOD Pin Header / Pushbutton S1 |
H | out | 16 | XMOD Pin Header / currently_not_used |
JTAGEN | in | 26 | Enable JTAG access to CPLD for Firmware update (zero: normal IOs, one: CPLD JTAG access). Selectable over S2-1 |
TCK / ADBUS0 | in | 30 | FTDI |
TDI / ADBUS1 | in | 32 | FTDI |
TDO / ADBUS2 | out | 1 | FTDI |
TMS / ADBUS3 | in | 29 | FTDI |
ULED | out | 10 | LED D4 (RED) |
XCLK | in | 4 | 12 MHz OSCI Ref CLK / currently_not_used |
...
UART is routed through the CPLD.
Output | Input |
---|---|
BD | BDBUS0 |
BDBUS1 | AC |
ULED D4 (RED) is E xor not G
To get content of older revision got to "Change History" of this page and select older document revision number.
Date | Document Revision | CPLD Firmware Revision | Supported PCB Revision | Authors | Description | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| REV01 | REV02 |
| REV01 finished | ||||||||||||||||||||||
2016-04-1126 | v.1 | --- | REV02 |
| Initial release | ||||||||||||||||||||||
All |
...