Versions Compared

Old Version 19

changes.mady.by.user John Hartfiel

Saved on

compared with

New Version 20

changes.mady.by.user John Hartfiel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

RGPIO Pin from FPAGValue
0-7LED 1-8
8-9PHY_LED 1/2
10-23unused
24-27reserved
28-31Interface detection

LED

LEDDescription

ULED1

VADJ selection when RGPIO Bus is not active else RGPIO Bus Pin 0

VADJ selection: blink  when VCCIO(VIOTB/VADJ) is disabled else on when VADJ on PCB REV05- or I2C Control or off when VADJ on PCB REV06+ S4 Control 

ULED2I2C control mode  when RGPIO Bus is not active else RGPIO Bus Pin 1
ULED3UART to Module activity  when RGPIO Bus is not active else RGPIO Bus Pin 2
ULED4UART to FTDI activity  when RGPIO Bus is not active else RGPIO Bus Pin 3
ULED5BOOTMODE (on Flash, off SD)  when RGPIO Bus is not active else RGPIO Bus Pin 4
ULED6CM2 when RGPIO Bus is not active else RGPIO Bus Pin 5
ULED7X6 when RGPIO Bus is not active else RGPIO Bus Pin 6
ULED8Y6 when RGPIO Bus is not active else RGPIO Bus Pin 7

...