Page History
...
| Name | Options | Description (Default Configuration) |
|---|---|---|
| TE::help | Display currently available functions. Important: Use only displayed functions and no functions from sub-namespaces | |
| Hardware Design | ||
| TE::hw_blockdesign_export_tcl | [-no_mig_contents] [-mod_tcl] [-svntxt <arg>] [-help] | Export Blockdesign to project folder <design_name>/block_design/ . Old *bd.tcl will be overwritten! |
| TE::hw_build_design | [-help] | Run Synthese, Implement, and generate Bitfile, optional MCSfile and some report files |
| Software Design | ||
| TE::sw_run_hsi | [-run_only] [-prebuilt_hdf <arg>] [-no_bif] [-no_bin] [-clear] [-help] | Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -prebuild_hdf <arg> isn't set. Copy the Hardware Defintition file to the working directory:<design_name>/workspace/hsi Run HSI in <design_name>/workspace/hsi for all Programes listed in <design_name>/sw_lib/apps_list.csv If HSI is finished, BIF-GEN and BIN-Gen are running for these Apps in the prepuilt folders <design_name>/prebuilt/... |
| TE::sw_run_sdk | [-open_only] [-update_hdf_only] [-prebuilt_hdf <arg>] [-clear\] [-help] | Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -prebuild_hdf <arg> isn't set. Copy the Hardware Defintition file to the working directory:<design_name>/workspace/sdk Start SDK GUI in this workspace |
| Programming | ||
| TE::pr_init_hardware_manager | [-help] | Open Hardwaremanager, autoconnect Targed target device and initialise flash memory with configuration from *_board_files.csv. |
| TE::pr_program_jtag_bitfile | [-used_board <arg>] | Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only). Programming Bitfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the fpga device. |
| TE::pr_program_flash_binfile | [-no_reboot] [-used_board <arg>] [-swapp <arg>][-available_apps] [-force_hw_manager] [-help] | Attention: For Zynq Systems only! Program the Bootbin from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name> to the fpga device. Appname is selected with: -swapp <app_name> After programming device reboot from memory will be done. Default SDK Programmer is used, if not available LabTools Programmer is used. |
| TE::pr_program_flash_mcsfile | [-no_reboot] [-used_board <arg>] [-help] | Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only). Initialise flash memory with configuration from *_board_files.csv Programming MCSfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the Flash Device. After programming device reboot from memory will be done. |
| Utilities | ||
| TE::util_zip_project | [-save_all] [-remove_prebuilt] [-manual_filename <arg>] [-help] | Make a Backup from your Project in <design_name>/backup/ Zip-Program Variable must be set in start_settings.cmd. Currently only 7-Zip is supported. |
...
Overview
Content Tools