Page History

The Yocto Project is a set of tools that helps to create customized Linux systems. This is a short description of how to prepare the host computer and how to create a project with yocto.

Used source files

The following description was tested with the source files listed in this table:

Build Host

Yocto Project is supported in many Linux Distributions, this descriptions refers to Ubuntu 20.04 LTS. Information and requirements for other distributions can be found in the Yocto Project Reference Manual.

General requirements

This requirements are generally needed for Yocto Project in Ubuntu 20.04:

• free disk space: at least 50 GB

• required packages: 

  Code Block
  language bash theme Midnight linenumbers true
  sudo apt install gawk wget git diffstat unzip texinfo gcc build-essential chrpath socat cpio \ python3 python3-pip python3-pexpect xz-utils debianutils iputils-ping python3-git python3-jinja2 \ libegl1-mesa libsdl1.2-dev pylint3 xterm python3-subunit mesa-common-dev

  
  

(optional) VM with supported Linux OS

If you do not have installed Linux OS on your host computer, you can optionally run a VM with a supported Linux OS:

• • e.g. with OracleVM:

    • VM Setup:

      • RAM: >= 8 GB

      • CPU:  >= 4

      • HDD: 200 GB dynamically

        • ubuntu-20.04-desktop-amd64.iso

        • install vm guest additions

      • Network: network bridge

      • optional: add shared folder, enable drag and drop

    • Note the general requirements

Install Yocto Project

1. Create and navigate to the yocto directory:

   Code Block
   language bash theme Midnight linenumbers true
   mkdir yocto && cd yocto

   
   

2. Clone the Yocto Project sources:

   Code Block
   language bash theme Midnight linenumbers true
   git clone -b dunfell https://git.yoctoproject.org/git/poky

   
   

Create a project for an Intel FPGA device

The following steps are required to create an image for the Intel FPGA devices:

1. For Intel FPGA devices you need the meta-layer 'meta-altera'. Run following command to clone this meta-layer from github into the 'poky' folder:

   Code Block
   language bash theme Midnight linenumbers true
   cd poky git clone -b dunfell https://github.com/kraj/meta-altera.git

   
   

2. Run the oe-init-build-env script to initialize the environment:

   Code Block
   language bash theme Midnight linenumbers true
   source oe-init-build-env

   
   

3. Add meta-altera layer to /yocto/poky/build/conf/bblayers.conf:

   Code Block
   theme Midnight linenumbers true
   bitbake-layers add-layer ../meta-altera

   
   

4. Modify the /yocto/poky/build/conf/local.conf file:

   1. Remove default configuration of the MACHINE variable and set it to a supported machine (see meta-altera/conf/machine for more information) of meta-altera layer e.g 'cyclone5':

      Code Block
      theme Midnight linenumbers true
      sed -i '/^MACHINE/s/MACHINE/#MACHINE/g' conf/local.conf echo -e "\nMACHINE = \"cyclone5\"" >> conf/local.conf

      
      

   2. Set the preferred linux kernel version (see meta-altera/recipes-kernel/linux for other linux kernel versions):

      Code Block
      theme Midnight linenumbers true
      echo -e '\nPREFERRED_PROVIDER_virtual/kernel = "linux-altera-lts"' >> conf/local.conf echo -e 'PREFERRED_VERSION_linux-altera-lts = "5.4%"' >> conf/local.conf

      
      

   3. Set the preferred u-boot version (see meta-altera/recipes-bsp/u-boot for other u-boot versions):

      Code Block
      theme Midnight linenumbers true
      echo -e '\nPREFERRED_VERSION_u-boot-socfpga = "v2021.04%"' >> conf/local.conf

      
      

5. Build the image:

   Code Block
   theme Midnight linenumbers true
   bitbake core-image-minimal

   The first run of this command can take several hours.

   The generated files such as the u-boot file, kernel file or the complete Image are stored in /yocto/poky/build/tmp/deploy/images.

References

1. Yocto Project Reference Manual
2. Yocto Project Quick Build
3. OpenEmbedded Layer Index