Page History

...

Reason: Follow AMD recommendation.

Impact: None.

...

#8 Changed diode (D3) from BAT54VV,115 to two separated diodes (D2, D3) BAT54A,215.

Type: Schematic Change

Reason: BOM optimization.

Impact: None.

...

#9 Changed 2.2 kOhm resistors (R56, R57, R58) to 2.4 kOhm.

Type: BOM Change

Reason: Follow AMD recommendation.

Impact: None.

...

#10 Pulled-down board revision signal "BR0" (FPGA U5, pin P17) and updated board revision documentation.

Type: Schematic Change

Reason: Update revision information.

Impact: None. Custom design needs to be updated by customer in cases where board revision signals are used.

...

#11 Added testpoints (TP11...TP14, TP23...TP28).

Type: PCB Change

Reason: Improve voltage and system monitoring.

Impact: None.

...

#12 Changed fiducials to standard fiducial type.

Type: Schematic Change

Reason: Use standard fiducials.

Impact: None.

...

#13 Changed stacked vias to staggered vias.

Type: PCB Change

Reason: Reliability improvement.

Impact: Reliablity improvement.

...

#14 Signal trace lengths changed.

Type: PCB change

Reason: Result of changes above.

Impact: Changed trace length have to be taken into account in existing designs.

...

#15 Updated B2B documentation.

Type: Documentation Update

Reason: Documentation Improvement.

Impact: None.

...

#16 Renamed document sheets.

Type: Documentation Update

Reason: Documentation Improvement.

Impact: None.

...

#17 Updated legal notices, revision history, block and power diagram. Updated page count and order. 

Type: Documentation Update

...