Page History
...
When using standard assembly option TE0706 then TE0711 Device side USB will appear in USB Host connector!
XMOD DIP-Switch
Use XMOD with default configuration and following DIP-Switch settings:
DIP | VALUE | Description |
---|---|---|
1 | ON | JTAG is connected to carrier |
2 | OFF | do not change |
3 | OFF | VIO powered by carrier |
4 | ON | XMOD-VDD powered by USB |
TE0706 with TE0715-30
TE0715-30 uses Kintex based SoC and has only one 3.3V tolerant bank. Note: TE0706-01 schematic uses net names from TE0720, they are do not have relation to net names and banks if TE0715 is used.
...
Overview
Content Tools