Page History
...
- (1) FMC is a LPC Connector on TE0701: DP0_..., GBTCLK0_... and TRST_L Pins are not connected. GA0 and GA1 set to GND. I2C and JTAG access over CPLD.
Separate TE0701_FMC_PINOUT table (PDF/XLSX) is available on: Trenz_Electronic Download-Pinout - (2) HP IO Banks only support 1.8V
- (3) MGT's Lanes goes to SD-Level shifter, it's recommended to desoldering level shifter
- (4) MGT's Lanes goes to SD-Level shifter, but module side 1.8V is not connected
CL Connector is usable as Cameralink only with module that map LVDS pins to this connector
TE0703
ETH | SD Card | USB Host | Reset | User LEDs | USB UART | USB JTAG | |
---|---|---|---|---|---|---|---|
TE0710 | , 1.8V B16 I/O | ,2 | |||||
TE0711 | |||||||
TE0712 | ,100 MBit | ||||||
TE0713 | |||||||
TE0715-15 | |||||||
TE0715-30 (2) | |||||||
TE0720 | |||||||
TE0741 (4) | ,MGT's | ||||||
TE0820 (2) | |||||||
TE0841 (2)(3) | ,MGT's |
...
Overview
Content Tools