Page History
...
The Trenz Electronic TEC0053 is a Motor Driver board to be used together with the reference controller board Controller Board for motor control evaluation.
...
- This product should be operated only by qualified electrical specialist.
- Never leave operating board unattended.
- There is a possible risk of burns due to the hot surfaces while operating the BoardEDPS board. Reason for this could be the high currents present in the motor driving outputs.
- All externally connected power sources must be SELV protected (Separated or Safety Extra Low Voltage).
- All wiring and installation should be performed only with all external power sources switched OFF or disconnected.
- No wiring or mechanical setup changes should be performed while the board is operating.
- The product is rated for indoor, dry environment use only.
- The product is intended to be used only in horizontal position on a non-conducting and non-inflammable surface.
- The mechanical setup must ensure that the board and all of its parts are firmly fixed in place to prevent accidental or unwanted movement(e.g. sliding, falling. etc.).
...
Figure 5: High-current parts of the TEC0053.
Warning |
---|
It is mandatory to use the delivered isolating cover of the PCB made of plexiglass as a minimum protection. Use holes H1, H9, H3 and H4 with the delivered 10mm spacers when mounting. |
Figure 6: Top view of the Board with isolating transparent plexiglass cover attached.
...
Overview
Content Tools