Page History
Compatibility
TE0706 is mainly for the use with TE0720 or TE0715 modules. It is possible to use with other 4x5 modules as well, but the usable functionality may be less.
...
When using standard assembly option TE0706 then TE0711 Device side USB will appear in USB Host connector!
XMOD DIP-Switch
Use XMOD with default configuration and following DIP-Switch settings:
...
TE0706 with TE0715-30
TE0715-30 uses Kintex based SoC and has only one 3.3V tolerant bank. Note: TE0706-01 schematic uses net names from TE0720, they are do not have relation to net names and banks if TE0715 is used.
...
With standard delivery of the TE0706, TE0715 would have all 3 FPGA I/O Banks not powered.
Power Supply
DIP Switches
# | Schematic name | Default | |
---|---|---|---|
1 | - | N/A | |
2 | PROGMODE | ON | Keep ON for Module JTAG normal operation |
3 | MODE | USER | Connected to Module MODE pin, select boot mode, see module documentation |
4 | EN1 | OFF |
Mechanical
Size: 65 x 100 mm
Include Page | IN:Legal Notices | IN:Legal Notices
---|
Children Display |
Overview
Content Tools