Page History
...
JTAG access to the mounted SoM is provided through B2B connector JB2 and is also routed to the XMOD header JX1 and also to pin header J3. With the TE0790 XMOD USB2.0 to JTAG adapter, the device of the mounted SoM can be programed via USB2.0 interface.
...
Table 6: XMOD header JX1 signals and connections.
When using XMOD FTDI JTAG Adapter TE0790, the adapter-board's VCC and VCCIO will be sourced by the on-boards 3.3V supply voltage. Set the XMOD DIP-switch with the setting:
...
Board to Board Connectors
| Include Page | ||||
|---|---|---|---|---|
|
...
Overview
Content Tools