Page History
...
Arrow USB Blaster 2 SMD module is a FT2232H based JTAG programmer supported by Intel Quartus. It's designed as Surface-mount module and have to be fitted on the target board in Surface Mount Technology. Furthermore, there is also an UART interface available and two I/O-pins reserved for future use.
...
Mechanical drawing below shows the positions of the signal pins on the PCB of the module labeled labeled with designators J1 ... J24. Followed by Pin pin description table.
Figure 2: JTAG Module mechanical drawing (Top View).
...
The USB interface is provided by the FTDI FT2232H IC. The entire USB protocol is handled on chip and compatible to USB 2.0 High Speed (480 MBps) and Full Speed (12 MBps).
...
Module size: 17.0mm × 17.0mm. Please download the assembly diagram for exact numbers.
- PCB thickness: ca. 1.2mm
- Highest part on the PCB is 1mm, the overall hight of the module is up to 2.4mm max.
All dimensions are given in millimeters.
...
Date | Revision | Contributors | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
| Ali Naseri |
| |||||||||
2017-11-23 | v.10 | Ali Naseri |
|
...