Page History
Scroll Ignore |
---|
Download PDF version of this document. |
Scroll pdf ignore | |
---|---|
Table of Contents
|
...
Scroll Only (inline) |
---|
Refer to https://wiki.trenz-electronic.de/display/PD/TE0725+TRM for online version of this manual and the rest of available documentation of the product. |
The Trenz Electronic TE0725 is a low cost small-sized FPGA module integrating a Xilinx Artix-7 (15-100T) and 32 MByte Flash memory for configuration and operation.
...
Model | Bitrate MB/s | Notes | |
---|---|---|---|
AFBR-59F2Z | 250 |
On-board LED's
LED | Color | FPGA | Notes |
---|---|---|---|
D2 | Green | M16 | |
D3 | Red | DONE | Active low |
Connectors
All connectors are are for 100mil headers, all connector locations are in 100 mil grid.
LED | Color | FPGA | Notes | |
---|---|---|---|---|
D2 | Green | M16 | ||
D3 | Red | DONE | Active low |
Power and Power-On Sequence
...
Parameter | Min | Max | Units | Reference document | |
---|---|---|---|---|---|
3.3V supply voltage | -0.1 | 3.6 | V | ||
HR I/O banks supply voltage (VCCO) | -0.5 | 3.6 | V | Xilinx datasheet DS181 | |
HR I/O banks input voltage | -0.4 | VCCO + 0.55 | V | Xilinx datasheet DS181 | |
Storage Temperature | -40 | +85 | °C |
Recommended Operating Conditions
...
Parameter | Min | Max | Units | Reference document | |
---|---|---|---|---|---|
VIN supply voltage | 3.135 | 3.45 | V | ||
HR I/O banks supply voltage (VCCO) | 1.14 | 3.465 | V | Xilinx datasheet DS181 | |
HR I/O banks input voltage | -0.20 | VCCO + 0.20 | V | Xilinx datasheet DS181 | |
Operating Temperature | 0 | +85 | °C |
Note |
---|
Please check Xilinx datasheet DS181 for complete list of absolute maximum and recommended operating ratings for the Artix-7 device. |
...
Please note that two different units are used on the figures below, SI system millimeters (mm) and imperial system thousandths of an inch(mil). This is because of the 100mil pin headers used, see also explanation below. To convert mils to millimeters and vice versa use formula 100mil's = 2,54mm.
All 100 mil pin headers are in 100 mil grid, the M3 mounting holes are in 50 mil grid aligned to the centers of the 100mil headers. The module is symmetrical, turning it 180 degrees will keep all I/O and Power pins in both 50 pin headers in compatible places.
...
Date | Revision | Notes | PCN | Documentation Link | ||
---|---|---|---|---|---|---|
2016-12-09 | 03 | Second production release | Click to see PCN | TE0725-03 | ||
- | 02 | First production release | TE0725-02 | |||
- | 01 | Prototypes |
Hardware revision number is printed on the PCB board together with the module model number separated by the dash.
...
Date | Revision | Contributors | Description |
---|---|---|---|
2018-01-11 | John Hartfiel | Minor formatting. | |
2017-06-07 | v.60 | Jan Kumann |
|
2017-01-27 | v.57 | Jan Kumann |
|
2017-01-12 | v.46 | Jan Kumann |
|
2016-12-15 | Thorsten Trenz |
| |
2016-12-09 | v.40 | Jan Kumann |
|
2016-12-02 | v.1 | Antti Lukats |
|
...