Page History
...
| Issues | Description | Workaround | To be fixed version |
|---|---|---|---|
| For PCB REV01 only: prebuilt does not boot | There is a Pullup missing on REV01 I2C SCL, so SI5338 configuration over MCS fails | Remove MCS | next update |
| For PCB REV01 only: CLK1B is not available on | addtional additional clk is not connected on PCB | use other internal generated CLK, maybe mor effort is needed to get ETH running | |
SREC SPI BootLoader default Offset | Default load offset is set to 0x400000 | Change manually on SDK to 0x5E0000 | next update |
...
Overview
Content Tools