Page History
...
Not used on this Example.
JTAG
Not used on this Example.
- Connect JTAG and power on PCB
- (if not done) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd" or open with "vivado_open_project_guimode.cmd", if generated.
- Open Vivado HW Manager
- Program Bitfile
Usage
- Prepare HW like described on section Programming
- Connect UART USB (most cases same as JTAG)
- Power On PCB (Do not restart, if you use Bitfile programming)
Note: FPGA Loads Bitfile from Flash
...
Overview
Content Tools