Page History

<!--
Template Revision 1.63
(HTML comment will not display, it's not needed to remove them. For Template/Skeleton changes, increase Template Revision number. So we can check faster, if the TRM style is up to date)
-->

Overview

Refer to https://wiki.trenz-electronic.de/display/PD/TE0841+TRM for online version of this manual and additional technical documentation of the product.

The Trenz Electronic TE0841-01 is an industrial-grade 4 x 5 cm SoM integrating Xilinx Kintex UltraScale FPGA, 1 GByte of DDR4 SDRAM, 32 MByte QSPI Flash for configuration and operation and powerful switch-mode power supplies for all on-board voltages. Numerous configurable I/Os are provided via rugged high-speed strips. All this on a tiny footprint, smaller than a credit card size at very competitive price. All Trenz Electronic 4 x 5 cm SoMs are mechanically compatible.5 cm SoMs are mechanically compatible.

Refer to http://trenz.org/te0841-info for online version of this manual and additional technical documentation of the product.

Key Features

• Xilinx Kintex UltraScale FPGA (XCKU035 or XCKU040)
• 2 banks of 512 MByte, 16 bit wide DDR4 SDRAM
• 256 Mbit (32 MByte) QSPI Flash
• 3 x Samtec Razor Beam LSHM B2B, 260 terminals total
  - 60 x HR I/Os
  - 84 x HP I/Os
  - 8 x GTH transceiver lanes (TX/RX)
  - 2 x MGT external clock inputs
• Clocking
  - Si5338 - 4 output PLLs, GT and PL clocks
  - 200 MHz LVDS oscillator
• All power supplies on-board, single power source operation
• Evenly spread supply pins for optimized signal integrity
• Size: 40 x 50 mm
• 3 mm mounting holes for skyline heat spreader
• Rugged for industrial applications

...

Table 11: Typical power consumption.

* TBD - To Be Determined.

...

Table 16: Module recommended operating conditions.

...

Table 18: Document change history.

...