Page History

...

1. Figure out the correct COM port number for the AnalogMAX DAQ1 board
   1. Open the device manager.

   2. Open ports and identify the port used by the AnalogMAX DAQ1 as visible in Figure 10.

2. Open terminal and set the parameters (example use for putty).
   1. Set the connection type to Serial.
   2. Set the "Serial line" to your above found COM port.
   3. Set the "Speed" to 115200.
   4. Use "Open" to start the connection.
3. Type following character for the appropriate usage.
   1. "?" to get the ID (AnalogMAX DAQ1 will return "1", DAQ2 will return "2")
   2. "t" to trigger ADC capture into the memory - 1M samples.
   3. "." to get one ADC sample.
   4. "+" to get 128 samples.
   5. "*" to get 16*1024 samples.

...