Page History

The maximum power consumption of a module manly depends on the design which is running on the FPGA.

Xilinx provide a power estimator excel sheets to calculate power consumption. It's also possible to generate power consumption of the developed design with Vivado.

Please also observe the TRM of the Trenz Electronic module and the power management of our corresponding carrier boards.

Trenz Electronic Modules which are offered in the shop are listed on our  shop page grouped by FPGA-Family. Wiki overview of the different series is available on Products

See Xilinx Answer Record: AR# 43989

Power sequencing of the FPGA/SoC banks and IOs must be still fulfil restrictions from manufacturer data sheet.

In most case IOs should be enabled after core voltages are powered on.  Some module output voltage can be used to enable carrier power regulator for variable bank powers and connected periphery.

See also datasheet power sequencing of the section of the give device:

7 Series:

• https://www.xilinx.com/support/documentation/data_sheets/ds181_Artix_7_Data_Sheet.pdf
• https://www.xilinx.com/support/documentation/data_sheets/ds182_Kintex_7_Data_Sheet.pdf
• https://www.xilinx.com/support/documentation/data_sheets/ds183_Virtex_7_Data_Sheet.pdf
• https://www.xilinx.com/support/documentation/data_sheets/ds187-XC7Z010-XC7Z020-Data-Sheet.pdf
• https://www.xilinx.com/support/documentation/data_sheets/ds191-XC7Z030-XC7Z045-data-sheet.pdf

U/U+ Series:

• https://www.xilinx.com/support/documentation/data_sheets/ds892-kintex-ultrascale-data-sheet.pdf
• https://www.xilinx.com/support/documentation/data_sheets/ds893-virtex-ultrascale-data-sheet.pdf
• https://www.xilinx.com/support/documentation/data_sheets/ds925-zynq-ultrascale-plus.pdf

Xilinx AR#

• https://www.xilinx.com/support/answers/37347.html
• https://www.xilinx.com/support/answers/44225.html