Page History

/include/ "system-conf.dtsi"
/ {
  chosen {
    xlnx,eeprom = &eeprom;
  };
};

/* USB  */

&dwc3_0 {
    status = "okay";
    dr_mode = "host";
    snps,usb3_lpm_capable;
    snps,dis_u3_susphy_quirk;
    snps,dis_u2_susphy_quirk;
    phy-names = "usb2-phy","usb3-phy";
    phys = <&lane1 4 0 21 100000000>;
    maximum-speed = "super-speed";
};
 

/* QSPI */

&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    status = "okay";
    flash0: flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
    };
};



/* ETH */

&gem3 {
        phy-handle = <&phy0>;
        phy0: phy0@1 {
                device_type = "ethernet-phy";
                reg = <1>;
        };
};



/* SD1 */

&sdhci1 {
    // disable-wp;
    no-1-8-v;

};


&i2c0 {
    i2cswitch@76 { // I2C Switch U13
        compatible = "nxp,pca9548";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0x76>;
        i2c-mux-idle-disconnect;

        i2c@2 { // FMCD (/dev/i2c-3)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <2>;
        };
        i2c@3 { // FMCE (/dev/i2c-4)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <3>;
        };
        i2c@4 { // FMCB (/dev/i2c-5)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <4>;
        };
        i2c@5 { // FMCC (/dev/i2c-6)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <5>;
        };
        i2c@6 { // PLL (/dev/i2c-7)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <6>;

            si570_2: clock-generator3@5d {
                #clock-cells = <0>;
                compatible = "silabs,si570";
                reg = <0x5d>;
                temperature-stability = <50>;
                factory-fout = <156250000>;
                clock-frequency = <78800000>;

            };
        };
    };
    i2cswitch@77 { // I2C Switch U37
        compatible = "nxp,pca9548";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0x77>;
        i2c-mux-idle-disconnect;

        i2c@0 { // SFP2 (/dev/i2c-9)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <0>;
        };
        i2c@1 { // FMCA (/dev/i2c-10)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <1>;
        };
        i2c@2 { // FMCF (/dev/i2c-11)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <2>;
        };
        i2c@3 { // SFP0 (/dev/i2c-12)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <3>;
        };
        i2c@4 { // SFP1 (/dev/i2c-13)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <4>;
        };
        i2c@5 { // MEM (/dev/i2c-14)
            // Low frequency to work with CPLD
            clock-frequency = <100000>;
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <5>;
            eeprom: eeprom@54 {
                compatible = "atmel,24c08";
                reg = <0x54>;
              };
        };
        i2c@6 { // DDR4 (/dev/i2c-15)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <6>;
        };
        i2c@7 { // USBH (/dev/i2c-16)
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <7>;
        };

    };
};