Page History

Note

The mounting of the heatspreader must be done with care. We do not take over guarantee for self assembly.

Compatibility

This heatspreader can be mounted on all TE0729 Revision 2 (TE0729-02-...).

Accessories

Gap Filler: Berquist GF3500S35-00-60-50CC

Gun: 50CC MANUAL GUN 1:1 RATIO SS95407

Tool: PH1 Philips crosshead torque screwdriver

Assembly

1. Apply Gap Filler EN: Apply GapFiller in at least approx. 2 mm thickness to the following components:
   DE: Eine ca. 2mm dicke GapFiller-Schicht auf folgende Bauteile auftragen:

   Image Removed

   Image Removed

   
   Image AddedImage Added

   Scroll Pagebreak

   
   
   
2. EN: Align KK0729-02 02TE carefully and press on lightly:
   DE: KK0729-02 ausrichten und leicht anpressen:
   
   
   

   Scroll Pagebreak

   EN:
   
   

3. Set the torque screwdriver at the assembly station to 0.5Nm.
   Insert the PH1 Philips crosshead bit and fix it crosswise from below with the four M3x6mm pan-head screws.
   

   DE:
   Den Drehmomentschrauber am Montagepaltz auf 0,5Nm einstellen.
   Das PH1 Philips Kreuzschlitzbit einlegen und mit vier M3x6mm Linsenkopfschrauben von unten überkreuz fixieren.
   Image Removed

   
   Image Added