Page History
| Scroll Ignore | |
|---|---|
|
Overview
Figure 1: TE0703 (REV 01).
...
Note: VCCIO for FPGA banks is has no default fixed connection to power supply. Those the bank VCCIO must be supplied to externally, or optionally 0 ohm resistors can be soldered onto TE0703 to set fixed 3.3V voltages.
Example wiring that powers ALL banks with 3.3V - those connections should be present on the base board, in this drawing 3 banks are have VCCIO supplied over connector and 4th bank is connected to 3.3V with jumper J5.
TE0715-30 modification
REMOVE jumper J5, add wires as on picture for VCCIO=1.8V for all banks.
...
| date | revision | authors | description |
|---|---|---|---|
| 2014-02-12 | Work in progress | ||
All |
| Include Page | ||||
|---|---|---|---|---|
|
Overview
Content Tools