Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Prepare HW like described on section Programming
  2. Connect UART USB (most cases same as JTAG)
  3. Power On PCB
    Note: FPGA Loads Bitfile from Flash

Vivado HW Manager


  1. Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).
    1. Select LEDs and set to Toggle Button
      Note: LEDS[0]=D1, LEDS[1]=D2,LEDS[2=D3 on PCB. LEDS[2] is inverted on PCB.

Image Added

 

System Design - Vivado

HTML
<!--
Description of Block Design, Constrains...
BD Pictures from Export...
  -->

Block Design

...

Image Added

Constrains

Basic module constrains

...