Page History
...
| Name / opt. VHD Name | Direction | Pin | Description |
|---|---|---|---|
| PLL_SDA_io | Bidir | K2 | I2C Si5345A-B |
| PLL_SCL_o | Out | K1 | I2C Si5345A-B |
| LED | Out | C2 | Status LED |
| A_LOS_i | In | H9 | SFP A Signal Loss (HIGH indicates signal loss) |
A_MDEF0_i | In | G9 | SFP A Modul Absent (HIGH when module physically absent) |
| A_RS0_o | Out | J9 | SFP A Rate Select RX (LOW for 1000BASE-SX, HIGH for 10GBASE-SR) |
| A_RS1_o | Out | H8 | SFP A Rate Select TX (LOW for 1000BASE-SX, HIGH for 10GBASE-SR) |
| A_SCL_o | Out | K10 | SFP A I2C Clock |
| A_SDA_io | Bidir | K11 | SFP A I2C Data |
A_TX_DIS_o | Out | H10 | SFP A (HIGH disables transmitter) |
| A_TX_FAULT_i | In | L12 | SFP A Laser fault Fault (HIGH indicates fault) |
| B_LOS_i | In | K12 | SFP B Signal Loss (HIGH indicates signal loss) |
| B_MDEF0_i | In | J13 | SFP B Modul Absent (HIGH when module physically absent) |
| B_RS0_o | Out | J12 | SFP B Rate Select RX (LOW for 1000BASE-SX, HIGH for 10GBASE-SR) |
| B_RS1_o | Out | L13 | SFP B Rate Select TX (LOW for 1000BASE-SX, HIGH for 10GBASE-SR) |
| B_SCL_o | Out | H13 | SFP B I2C Clock |
| B_SDA_io | Bidir | G10 | SFP B I2C Data |
| B_TX_DIS_o | Out | G13 | SFP B (HIGH disables transmitter) |
B_TX_FAULT_i | In | G12 | SFP B Laser fault Fault (HIGH indicates fault) |
C_LOS_i | In | F12 | SFP C Signal Loss (HIGH indicates signal loss) |
| C_MDEF0_i | In | E12 | SFP C Modul Absent (HIGH when module physically absent) |
| C_RS0_o | Out | F13 | SFP C Rate Select RX (LOW for 1000BASE-SX, HIGH for 10GBASE-SR) |
| C_RS1_o | Out | F9 | SFP C Rate Select TX (LOW for 1000BASE-SX, HIGH for 10GBASE-SR) |
| C_SCL_o | Out | E13 | SFP C I2C Clock |
| C_SDA_io | Bidir | D11 | SFP C I2C Data |
| C_TX_DIS_o | Out | D12 | SFP C (HIGH disables transmitter) |
| C_TX_FAULT_i | In | C12 | SFP C Laser fault Fault (HIGH indicates fault) |
| D_LOS_i | In | B11 | SFP D Signal Loss (HIGH indicates signal loss) |
D_MDEF0_i | In | B12 | SFP D Modul Absent (HIGH when module physically absent) |
| D_RS0_o | Out | B13 | SFP D Rate Select RX (LOW for 1000BASE-SX, HIGH for 10GBASE-SR) |
| D_RS1_o | Out | C13 | SFP D Rate Select TX (LOW for 1000BASE-SX, HIGH for 10GBASE-SR) |
| D_SCL_o | Out | A12 | SFP D I2C Clock |
| D_SDA_io | Bidir | F10 | SFP D I2C Data |
| D_TX_DIS_o | Out | E9 | SFP D (HIGH disables transmitter) |
D_TX_FAULT_i | In | D9 | SFP D Laser fault Fault (HIGH indicates fault) |
| LA00_P | In | M9 | SCL In |
| LA00_N | In | N5 | SDA In |
| LA01_P | Out | L4 | SDA Out |
| LA01_N | In | J5 | I2C GPIO MUX 0 |
LA02_P | In | M13 | I2C GPIO MUX 1 |
LA02_N | In | M12 | I2C GPIO MUX 2 |
| LA03_N | In | N6 | RS0 |
| LA03_P | In | M5 | TX_DISABLE |
| LA04_N | Out | K7 | TX Fault A+B+C+D |
| LA04_P | In | J7 | RS1 |
LA05_N | Out | L5 | LOS A |
| LA05_P | Out | K5 | DEF0 A, SFP A Inserted Flag |
| LA06_N | Out | J6 | LOS B |
| LA06_P | Out | K6 | DEF0 B, SFP B Inserted Flag |
| LA07_N | Out | M8 | LOS C |
| LA07_P | Out | N8 | DEF0 C, SFP C Inserted Flag |
| LA08_N | Out | M7 | LOS D |
| LA08_P | Out | N7 | DEF0 D, SFP D Inserted Flag |
| LA09_P | - | N4 | /currently unused |
| LA09_N | - | M4 | /currently unused |
...
- LA00_P, LA00_N and LA01_P form a "three wire I2C" bus with seperate data in and output.
- LA01_N, LA02_P and LA02_N are used Selector as selector for the MUX.
SEL | I2C device |
|---|---|
| 000 | SFP A |
| 001 | SFP B |
| 010 | SFP C |
| 011 | SFP D |
| 100 | Si5345 Clock Generator |
...
MAX10 JTAG for programming is always enabled and accessable accessible via the FMC connector, pin header J3 and testpoints.
Appx. A: Change History and Legal Notices
Revision Changes
...
Document Change History
To get content of older revision got revision go to "Change History" of this page and select older document revision number.
| HTML |
|---|
<!-- Generate new entry: 1:add new row below first 2:Copy Page Information Macro(date+user) Preview, Page Information Macro Preview, CPLD/PCB(or update)to the empty row 3.Update Metadate =Page Information Macro Preview+1 --> |
Revision Changes
| Date | Document Revision | CPLD Firmware Revision | Supported PCB Revision | Authors | Description | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| REV01 | REV01, REV02 |
|
| ||||||||||||||||||||||
| 2018-08-07 | v.13 | REV01 | REV01 | John Hartfiel |
| ||||||||||||||||||||||
| 2018-06-07 | v.01 | REV01 | REV01 | Martin Rohrmüller |
| ||||||||||||||||||||||
| All |
|
...
Legal Notices
| Include Page | ||||
|---|---|---|---|---|
|
Overview
Content Tools